Security Door Locks and Hardware
PSL-5
PSL-5 is a single-door option in our locks and hardware range, with screened ventilation. Final size, swing, screen or glass arrangement, finish and hardware are confirmed from the opening before a quote is approved.
Planning illustration / final configuration confirmed in the written quote.
Build a quote request
Add the opening details you know. Final dimensions, operation and availability are reviewed before any order is approved.
| Configuration | Single-door assembly |
|---|---|
| Visual layout | flowing ornamental pattern |
| Glass or screen zone | screen or mesh field |
| Illustrated finish | dark finish |
| Sizing | Quoted from finished opening measurements |
| Order review | Dimensions, swing and options confirmed in writing |
| Availability | Confirmed after dimension and option review |
About this door
PSL-5
PSL-5 is presented as one configuration within the security door locks and hardware range. The most useful comparison starts with daily operation. The illustration helps compare proportion and pattern, but the approved quote—not the image—defines the final frame, panel, glass or screen, hardware and finish. This keeps the buying decision tied to the real doorway instead of a catalog label.
The visible composition uses a flowing ornamental pattern and features screen or mesh field. That combination changes daylight, privacy, airflow and the amount of the primary entry door that remains visible. View the design from the curb and from inside the house. A layout that looks open in a close product image can feel much denser once the main door, handle set and surrounding trim appear behind it.
Compare lock function, keying, latch throw, deadbolt design, cylinder format, trim profile, finish, handing and replacement-part availability. For high-use entries, serviceability and comfortable operation matter as much as appearance. For this configuration, pay particular attention to how the design pattern meets the handle rail and lower portion of the door. Ask for the selected glass or mesh system, replacement-panel method and hardware preparation to be listed separately so two quotes can be compared on the same basis.
Record the door thickness, bore or mortise dimensions, backset, center-to-center spacing, edge preparation, handing and the projection of nearby hardware. Photos with a ruler beside the preparation reduce preventable mismatches. Include one straight-on photograph from each side, a close view of the sill and an image of the hinge and latch areas. Place a tape measure in the frame when practical. Photographs do not replace dimensions, but they expose trim projections, slopes and conflicts that a list of numbers can miss.
The strike and surrounding frame carry much of the locking load. Use the fasteners and reinforcement intended for the assembly, align the latch without forcing it and verify that the key and thumbturn operate freely with the door open and closed. The installer should receive the approved opening dimensions and configuration before arriving. That allows the fastening surface, anchors, sealant, shims and any required trim work to be planned instead of improvised after the door is unpacked.
Use a dry lubricant where the hardware manufacturer permits it, keep paint out of the latch path and correct alignment problems before repeated slamming damages the mechanism. Retain key codes and part information with the order record. Keep the final order record with the home files. It should identify the opening, finished size, swing, finish, hardware and glass or screen arrangement so future service does not depend on recognizing a product from appearance alone.
Do not enlarge holes, grind the lock case or move the strike before confirming that the problem is not door alignment. Field modification can weaken the preparation and make future replacement more difficult. Before approval, read the quote line by line and compare it with the opening photos. A corrected dimension or hinge side at that stage is simple; discovering the mismatch after an opening-specific assembly is complete is not.
Where it works
- Treat the lock as part of the opening, not a last-minute accessory.
- Single openings where screen or mesh field supports the desired balance of view and protection.
- Projects with complete opening measurements, swing information and installation photos ready for review.
- Buyers who want the flowing ornamental pattern and dark finish shown in the planning illustration.
Questions
PSL-5 questions
Is PSL-5 shown as a finished manufactured door?
The image is a configuration illustration used to compare layout and finish. The written quote defines the final product, dimensions, materials, glass or screen and hardware.
What measurements are needed for PSL-5?
Send three widths, three heights, both diagonals, hinge side, sill details, mounting-surface dimensions and clear photos from both sides of the opening.
Can I change the finish, screen or glass arrangement?
Request the desired changes in the quote. Availability depends on the dimensions and door type, so each option should be confirmed in writing rather than inferred from the illustration.
How should I compare this with another configuration?
Compare clear opening, flowing ornamental pattern, screen or mesh field, hardware preparation, operation, service access, installation requirements and the complete quoted scope.
When is the order ready to approve?
Approve only after the final document lists the opening dimensions, swing, finish, glass or screen, hardware, included components, delivery terms and any field work that remains.
More from this range